Constitutive Relations for Large Deformation Plasticity
Influence of the choice of measures of stress and deformation upon the representation of constitutive relations for elasto-plastic solids undergoing finite deformation is discussed. The...

Penetration Tests in a Particulate Calibration Chamber
A numerical technique which couples discrete element method with boundary element method has been developed to simulate a two dimensional particulate assembly. Soil particles in the near...

Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...

Constitutive Relations for Granular Solids Accounting for Heterogeneous Deformation Fields
Under high deviatoric stress levels corresponding to large strains, the deformation of granular media is highly heterogeneous. A micro-mechanical approach is developed here to model the...

Geometry of Yield Surfaces for Frictional Flow of Granular Materials
In the frictional flow regime, the discrete particles which compose of granular material roll or slide over one another, maintaining essentially continuous contact. Many theorists, including...

Numerical Experiments for Anisotropic Behavior of Granular Materials
A three dimensional discrete element computer code 'TRUBAL' is used to investigate the effect of initial anisotropy on stress-strain and volume change characteristics...

Reliability-Oriented Materials Design of Composite Materials
A basic formulation for evaluating safety index of unidirectional fiber reinforced laminate is presented. The proposed formulation is based on in-plane failure criteria of composite laminate...

Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....

A Microplane Constitutive Model for Soils
A microplane model for the inelastic behavior of soils is presented. The microscopic constitutive equations are defined independentely for a set of microplanes covering all possible orientations,...

Creep of Polycrystalline Ice
This paper discusses the extension of creep models for polycrystalline ice to include the effects of a non-monotonic loading history. Attention is focussed on cyclic loading since it is...

Geocomposite Waste Cell Capping System for Steep Slopes
Several geosynthetics manufacturers have developed new products with high surface friction characteristics for capping steep slopes. One such product has been developed that will satisfy...

Effect of High Frequency Response on Fatigue of Offshore Structures
Welded steel specimens have been tested under several loading spectra to determine the effect on fatigue life of high frequency components in the psd of the stress or strain in the joint....

Analytical Model for RC Panels Under Cyclic Load
There are several existing constitutive laws for cracked concrete and steel in RC developed in Okamura laboratory. These models have been developed and verified through reversed uniaxial...

Tangent Modulus of Piles Determined from Strain Data
When evaluating measurements of strain or telltale shortening of a pile subjected to loading test, precise knowledge of the 'elastic' modulus is necessary. By means of plotting and analyzing...

Markov Chains & Soil Constitutive Modeling
The focus of this research effort is the construction of a mathematical framework to assist in understanding the role of uncertainties in the constitutive/dynamic behavior of soils. The...

Endochronic Theory and Non-Llinear Stochastic Dynamics of 3-D Frames
Analytical continuous expressions of the material constitutive law are required by equivalent linearization techniques in nonlinear stochastic dynamics. Extensions to study 3D frames,...

Response of Advanced Composite Space Materials to Thermal Cycling
In addition to microgravity and lack of atmosphere, the space environment provides intense radiation of both penetrating and nonpenetrating types. This paper focuses on the cyclic radiational...

Mechanical Properties of Model Ice Rubble
Experiments were conducted to measure the mechanical properties of bulk ice rubble. Tests were performed under isothermal and plane strain conditions. Fresh water ice blocks were used...

Study of Structural Behavior with Computer Simulation
The application of computer simulated testings of structural elements in the civil engineering undergraduate education is described. With a computer simulation a structural component may...

Creep Modelling for Masonry under Plane Strain
A computational procedure based on the principle of superposition to estimate creep strains in composite masonry walls is developed and presented in this paper. This development is based...

 

 

 

 

Return to search